KTM-WoodGrain Finishing System (Patented)

KTM is ideal for today’s entry doors, using our patented “KTM WoodGrain Finish”.

KTM-WoodGrain is the original 2-Step Finishing process that transforms fiberglass, steel, garage or even interior molded doors from the ordinary to the extraordinary! For years fiberglass doors have been finished like wood doors, and to no one’s surprise wood finishes just don’t hold up on fiberglass! KTM has pioneered the way to understanding and figuring out the correct way to finish the fiberglass door. Our finishes are second to none. We’ve been copied but other finishes frankly don’t come close to duplicating our colors, process, and method for making fiberglass look like wood.

Avilable for Online Purchasing

The first coat is "Step #1", forms the background color and "Step #2", the topcoat highlights the embossed grain and tones the background color giving the look of wood. Each color is specifically formulated to render the desired color, depth and effect you want in the finished door. Many questions have been asked about using a clearcoat over the KTM-Wood Grain.KTM-SV, our exterior rated clearcoat is fully compatible with and will increase the performance properties of the woodgrain system for those who decide they need it.

KTM-WoodGrain Finishes

…offer you rich, distinctive colors with superior ‘depth of grain’—second to none.
…have more beauty, superior adhesion, and give greater protection for your door than trade-sale paints.
…are composed of two companion colors rendering a true wood look to your fiberglass entry door; whether oak, fir or mahogany style.
…are paints, not stains.
…are chemically engineered for Fiberglass.
…are waterborne with 100% adhesion to fiberglass and associated surfaces found on doors.
…are beautiful and durable.
…for the Professional or Do-It-Yourself Painter.

Perfect results

Picture Perfect Results the First Time!
Two-Step Procedure, Spray or Brush-on
Rich, Consistent Color
Same Day Application
Use for matching wood trim
Soap and Water Clean-Up

At KTM we specialize in the "Finishing System" for your door...

Unfinished, or KTM Finished? ... YOU decide!

Step 1	Solid, pigmented, background color—spray or brush, controls the background color development eliminating variations in color common in transparent stain systems.
Step 2	Solid, pigmented, background color--Sparingly applied by brush, graining pad, or spray evenly on door surface. Excess then wiped off using paper towel for beautiful, even finish
Tip!	‘Grain’ coat dries slowly, allowing ample “working-time”. (If relative humidity is low (less than 68%RH), grain coat may dry too fast. Use room humidifier to delay drying and prolong worktime.)

"Picture Perfect Results the First Time!"

Back to Coatings for Fiberglass

:	Home \| Site Map \| Contact Us

It's Not Just Paint - It's A KTM® Finish!